An affordable, self installation (by yourself or your plumber) water softener machine perfect for a 1-2 person house or flat. Designed to fit into a kitchen cupboard or under the sink onto 15mm piping. Must measure the cupboard/desired space which is accessible to an electric socket.
Superior Performance:
Is achieved by the more expensive, finer and more efficient resin contained within the high capacity vessel, which results in more softened water for every kilogram of salt used. This machine will produce a whopping 960 litres of softened water between each cycle.
All of our water softeners come with everything you need to install onto a 15mm (most common) size pipe including:
15mm Install kit:
-
2x Compression Tee – 15mm with 3/4″ Male Tap
-
Non Return Valve
-
Compression Ballofix 15mm
-
Compression Equal Tee 15mm
Installation Diagram:


Machine Specifications:
-Brand: Aqua Cure
Flow Rate: 33 litres p/min, peak 45 litres p/min
-Inlet/Outlet Size: 3/4" BSP
-Max Water Temp: 35°C/95°F
-Min Water Temp: Protect from freezing
-Dimensions : Metric 465mm (h) x 280mm (w) x 450mm (d) Imperial 18.30" (h) x 11.02" (w) x 17.71" (d)
-Min Working Pressure: 1.5bar/22 psi
-Max Working Pressure: 4.0bar/58 psi
-Salt used (per regeneration): 0.7kg/1.54 ibs
-Capacity (per regeneration): 660 litres/174 US gallons
-Power: 24/240 VAC volts, 3 amp. Must be installed on continuous supply
-Resin Volume: 5 litres
Maintenance and warranty:
*The machines require tablet salt to refresh and regenerate the resin. They regenerate their internal resin beds automatically based on a pre set metered controlled valve so you don't have to worry about maintenance of the machine
*24 months warranty on parts and labour.
*Contains a service card that can be completed and sent to our service partners
Setting the Time & date:
-
Set “Hour” by Pressing and Holding CLOCK button for 3 seconds. Use the UP or DOWN button to set hour.
-
Press SET button to confirm. Minutes will now flash on display panel.
-
Use the UP or DOWN button to set minutes.
-
Press SET button to confirm. Days will now flash on display panel.
-
Use the UP or DOWN button to set hour.
-
Press SET button to confirm.
-
Display will automatically reset after 30 seconds.
Set up Completion
-
Slowly turn the water on at the inlet valve and check for visual leaks on the unit.
-
Manually put approximately 8 inches of fresh clean water into the salt tank.
-
Turn on the outlet water valve.
-
Ensure that the bypass is left in the closed position.
-
Finally fill the brine tank with salt and fit the salt lid.